How I can create a Roaming user group for guests ?

[Ritika SharmaParticipant]

hi, I want to create a Roaming User group so that our customers in the restaurant can access the internet

[Ritika SharmaParticipant]

To create Roaming User Group follow the steps as below

Step 1) First go to the User management section

Step 2) Select User management -> User group

Step 3) Click on “ADD GROUP”

Step 4) Select the Normal User Group

Step 5) Provide a Relevant name and Description(optional)

Step 6) Select the Roaming User in “Select Type”

Step 7) Now select the Captive Portal
(WiJungle gives many options for the Roaming User
captive Portal such as Simple Social Media Template,
Simple Mobile Number Template, etc. Admin can choose
as per the requirement)

Step 8) Now select the PORTAL LOCATIONS
(In PORTAL LOCATIONS you have to choose the Location
(ports or VLANs) on which you want to show the Roaming user
captive portal most probably you want to apply it on Guest
location but you can choose as per your preference)

Step 9) Now select Allowed location if the above user roams
in this location can he access the internet or not

Step10) Select the Bandwidth Policy

Step11) Select the Filtering Policy

Step12) Choose User Auto Logout Time
(This option is used to logout the user who is not
connected the network for a specific time)

Step13) Choose Simultaneous Logins
(This option is used to specify how many user can login
through single User ID)

Step14) Daily Logout
(Enable this option if you want to logout all the user
at a specific time, you can also select the session time)

Step15) Click on Save

you can access the internet by logging into the respective
portal which is set by the admin.

you can check the Roaming user in
User Management / User Management / Roaming Users

[Ritika SharmaParticipant]

How to create a Roaming User Group?

To create Roaming User Group follow the steps as below

Step 1) First go to the User management section

Step 2) Select User management -> User group

Step 3) Click on “ADD GROUP”

Step 4) Select the Normal User Group

Step 5) Provide a Relevant name and Description(optional)

Step 6) Select the Roaming User in “Select Type”

Step 7) Now select the Captive Portal – select Mobile Number template
(WiJungle gives many options for the Roaming User
captive Portal such as Simple Social Media Template,
Simple Mobile Number Template, etc. Admin can choose
as per the requirement)

Step 8) Now select the PORTAL LOCATIONS
(In PORTAL LOCATIONS you have to choose the Location
(ports or VLANs) on which you want to show the Roaming user
captive portal most probably you want to apply it on Guest
location but you can choose as per your preference)

Step 9) Now select Allowed location if the above user roams
in this location can he access the internet or not

Step10) Select the Bandwidth Policy

Step11) Select the Filtering Policy

Step12) Choose User Auto Logout Time
(This option is used to logout the user who is not
connected the network for a specific time)

Step13) Choose Simultaneous Logins
(This option is used to specify how many user can login
through single User ID)

Step14) Daily Logout
(Enable this option if you want to logout all the user
at a specific time, you can also select the session time)

Step15) Click on Save

you can access the internet by logging into the respective
the portal which is set by the admin.

you can check the Roaming user in
User Management / User Management / Roaming Users

Note: you can also change the design of the login portal
as per your requirement by going on
Captive Portal Settings / Configure Design
when you will scroll down you can see the edit option where you can edit