How to setup SSL VPN and share one subnet for limited users
7 years, 6 months agosnehal
Yes, it is possible with SSL VPN.
Please follow the below steps:
WiJungle Firewall End:
Tunnel Access [VPN & Certificate -> SSL -> Tunnel Access]:
1. Go to “VPN & Certificate” -> SSL
2. Choose SSL Server & Client Certificate
3. Click on “Per User Certificate” if different certificates are required for each fixed user
4. Set IPv4 Lease Range as “192.168.0.2-192.168.0.200” for example
5. Choose Dead peer detection if required else leave it and save
SSL VPN Policy [VPN & Certificate -> SSL -> Policy]:
1. Go To Policy Tab
2. Add SSL VPN Policy
3. Enter name as development
4. Tunnel Type -> Split Tunnel
5. Enter Server Ips
6. Save
User Group [User Management / User Management -> User Groups]:
1. Edit Development Group
2. Choose SSL Policy -> developement
3. Update
Client End:
1. Download the WiJungle VPN Client From https://www.wijungle.com/downloads/softwares
2. Choose 32bit or 64 bit setup
3. Install TAP Driver
4. Install WiJungle VPN Setup
5. Close the program
6. Go to https://GatewayIp:9084
7. Enter your fixed userid and password
8. Download your os configuration
9. Open WIJungle VPN with “run as administrator”
10. Choose .conf file downloaded in step 8
11. Enter Gateway IP and Port No (9083)
12. Connect and enter credentials
snehal
