WiJungle now supports : 1. Load Balance : Support both TCP and UDP based application including lightweight MQTT, Web Socket or other protocols for machine to machine connectivity between IoT appliances such as small sensors, mobile devices etc.. Allows auto-discover and auto-scale workloads deployed in public cloud along with GSLB. Prefetch […]
Display System Limits
Run the following commands to see the limits: config show general limits Sample output are as below: max_addresses: 65536 max_address_groups: 65536 max_dos_policy_rules: 10000 max_access_rules: 10000 max_entries_per_access_rule: 131072 max_vlans: 4096 max_nat_policy_rules: 8192 [Includes all types of NAT like manual NAT,Auto-NAT, static nat, dynamic nat, dynamic pat] max_nat_sessions: 5,000,000 max_zone: 120 max_custom_application_signatures: […]
How to enable Multi-Factor authentication in WiJungle Appliances
Multi-factor authentication is an authentication method in which a user or device is granted access only after successfully providing two or more verification to an authentication mechanism. WiJungle supports multiple HW/SW verification channels like SMS, Email, Google Authenticator, Authy etc. which can be enabled for User as well Admin access […]
How to create Route based IPsec VPN
In this mode, routing table can be used to send the specific traffic into the IPsec connection. It attaches an Virtual Tunnel Interface(VTI) to a single connection which is dynamically added into interfaces. We can perform below operations on this interface: 1. Set Interface IP Address 2. Use in Static […]
DPI SSL Sessions & TLS/SSL throughput
Concurrent SSL DPI Sessions It depicts the maximum number of concurrent SSL Decryption session an appliance can support. Please find the DPI SSL Sessions values as below: 1. U1000 – 380,000 2. U1500 – 390,000 3. V2000 – 400,000 4. U3500 – 600,000 5. U5000 – 640,000 6. U7500V – […]
How to configure 802.3ad Link Aggregation?
Link aggregation(802.3ad) allows you to combine two or more physical interfaces together to form an aggregated link. This new link has the bandwidth of all the links combined. If a link in the group fails, traffic is automatically transferred to the remaining interfaces with the only noticeable effect being reduced […]
How to enable Guest OTP portal with SMS Gateway Authentication
To enable the guest OTP portal first you need to select the messaging gateway you want to use 1. Navigate to “SMS GATEWAY / FEEDBACK >>Configuration Settings” 2. There will be two available options if you are in the Indian region select “Use Unlimited Free SMS of WiJungle” otherwise select […]
How to configure Active Directory Single Sign On?
There are various simple steps need to be followed: 1. Open WiJungle Dashboard->Navigate to User Management->Authentication Server 2. Click on Add Server 3. Enter all the needed information 4. Click on Test Connection to verify it 5. Save it and Click on Import Wizard to add User/Usergroups 6. Go to […]
What is Unified License in WiJungle Appliances?
Our organization vision is to provide Unified Network Security across industry, the same reflects in our License Policy as well. Our Unified License automatically contains below features: 1. VPN (SSL+IPsec+L2TP both v2 & v3 etc.) License 2. PMS License 3. Antivirus & Antimalware License 4. ATP/Sandstorm License (Zero Day Attack […]
What all app-layer parsers are supported in WiJungle Appliance?
WiJungle supports 3000+ App signatures and 200+ protocols. You can configure below app-layer parsers port agnostically for inspection and protection along with other custom parsers: rfb mqtt krb5 snmp cifs ike tls rpc arp dcerpc ftp ftps rdp ssh http2 telnet smtp esmtp imap imaps pop3 pop3s smb v1/v2 nfs […]